Dear colleagues, I am struggling with correct marking of rating on the product.
How would you mark your product when connected to : 3 phase star system (with Neutral) and/or 3 phase delta system and/or 1 phase system Standard is IEC 62368-1 – table F.2 Some examples that I have in mind: 400 Y/230 V 3~; 50/60Hz, 3A, (This is for star system but with this marking not identified that Netral is required) 208 V 3~, 50/60Hz, 3A (This is for connection to Delta system) 208-230V, 50/60Hz, 6A (This is for 1 phase L to N or 2 phase L1 to L2 connection) What do you think? I remeber that in the past connection to STAR system was identified like 400/230V, 50/60Hz, 3A, 3W + N + PE, however it looks that this was changed. Thank you for your support. Best regards, Boštjan - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
