Charlie, EN 50498 refers back to the old EU automotive directive 2004/104/EC, which uses CISPR 25 (2002). CISPR 25 specifies a 1 meter measurement distance with the EUT on a copper bench.
Thanks, David Schaefer Operations Manager Element Materials Technology 9349 W Broadway Ave Brooklyn Park, MN 55445, United States O +1 612 638 5136 ext. 4003 [email protected] www.element.com From: Charlie Blackham [mailto:[email protected]] Sent: Tuesday, October 13, 2020 7:40 AM To: [email protected] Subject: [PSES] EN 50498:2010 Emissions measurement distance CAUTION:This email originated from outside of Element Materials Technology. DO NOT click links or open attachments unless you recognize the sender and know the content is safe. Please contact IT Service Desk if you are in any doubt about this email. All I couldn't see the measurement distance specified in this standard for aftermarket electronic equipment in vehicles - have I missed it, or do you use 3m as per the emissions standards listed in the bibliography? Best regards Charlie Charlie Blackham Sulis Consultants Ltd Mead House Longwater Road Eversley RG27 0NW UK Tel: +44 (0)7946 624317 Email: [email protected]<mailto:[email protected]> Web: https://sulisconsultants.com/<https://protect-eu.mimecast.com/s/I5T6Cr8Gqc7mrJ6C7fxSb/> Registered in England and Wales, number 05466247 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html<http://www.ieee-pses.org/emc-pstc.html> Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/<https://protect-eu.mimecast.com/s/UlXDCwVNyskNvrPU95fNd/> can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/<https://protect-eu.mimecast.com/s/_-OxCxn0zuDXLNBiwIRsD/> Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html<http://www.ieee-pses.org/listrules.html> For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> Disclaimer This email is sent on behalf of Element Materials Technology Group Limited or the relevant group company with which you are dealing (together, Element). Element Materials Technology Group Limited is a limited company registered in England and Wales with registered number 09915743. Its registered office is at 5 Fleet Place, London, England, United Kingdom, EC4M 7RD and its principal place of business is at 10 Lower Grosvenor Place, London, England, United Kingdom, SW1W 0EN. Element cannot accept responsibility for any loss or damage sustained as a result of viruses or malware and the recipient must ensure that the email and attachments are virus and malware free. Emails and attachments are opened at your own risk. The information transferred is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Transmission of this email is not intended to waive confidentiality and/or privilege. The contents of this email are subject to contract and do not contain an offer that is capable of acceptance. Unless otherwise agreed in writing with you, the Element Standard Terms of Business for the relevant group company apply in respect of any services provided to you, including advice given to you by email. The Standard Terms of Business are available on request and can be found at https://www.element.com/terms/terms-and-conditions For information about how we process data and monitor communications please see our Privacy statement at https://www.element.com/terms/privacy-statement - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
