Hi Bob,
I know my KeyTek ECAT does have the 18uF. Not sure if that helps much though. James James Pawson The EMC Problem Solver Unit 3 Compliance Ltd EMC Testing / Design for EMC / Problem Solving / Pre Compliance / Consultancy / Environmental & Vibration www.unit3compliance.co.uk <http://www.unit3compliance.co.uk/> // 07811 139957 2 Wellington Business Park, New Lane, Bradford, BD4 8AL Registered in England and Wales # 10574298 From: Sykes, Bob <[email protected]> Sent: 11 December 2020 20:39 To: [email protected] Subject: [PSES] Keytek EMC Pro direct surge output question Worldly Experts, I've been asked to perform data-line surge testing on shielded cables per EN 61000-4-5 (para. 7.6) My question is: Does anyone know if the Keytek EMC Pro surge generator has the 18uF capacitor (referenced in para 7.6 and 6.2.3 of the standard) built into the internal CDN? This is the first time I have attempted this test. The EMC Pro manual has little details on this and Keytek (the company) is long gone. adTHANKSvance, Bob Sykes _____ Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
