I Concur, I’ve only been asked to do this test by a manufacturer. Sincerely,
Derek. > On Feb 2, 2021, at 10:14 AM, David Schaefer > <[email protected]> wrote: > > HI James, > > In my experience ISO 7637-3 is only required by manufacturer specifications – > Volvo, Polaris, John Deere, Nissan, etc. I do not know of any mandatory > standards that use the -3. > > Thanks, > <https://bit.ly/3gt02wc> > > > > <image592842.jpg> > David Schaefer > Operations Manager > Element Materials Technology > 9349 W Broadway Ave > Brooklyn Park > , > MN > 55445 > , > United States > O +1 612 638 5136 <tel:+1%20612%20638%205136> > ext. 4003 > [email protected] <mailto:[email protected]> > www.element.com <http://www.element.com/> > <image779635.png> > <https://www.linkedin.com/organization-guest/company/element-materials-technology?challengeId=AQFf9AemZ4SobwAAAXOQwivOsnkHiTt2ByoCkOxVQjOGOjRlivicVgYlN1dz5QXjId9bpa0keWzfVxhl8KPj78uD6-S6nfqRsg&submissionId=e49e0dc0-96a3-2516-27fa-ee2e8c42b177> > > <image696424.png> <https://twitter.com/ElementTesting/> > <image238620.jpg> > <https://elementmaterials.eu.qualtrics.com/jfe/form/SV_3xQqm84s6IydI5D> > From: James Pawson (U3C) [mailto:[email protected] > <mailto:[email protected]>] > Sent: Tuesday, February 2, 2021 8:55 AM > To: [email protected] <mailto:[email protected]> > Subject: Re: [PSES] ISO 7637-3 (automotive) > > CAUTION:This email originated from outside of Element Materials Technology. > DO NOT click links or open attachments unless you recognize the sender and > know the content is safe. Please contact IT Service Desk if you are in any > doubt about this email. > > Hello Robert, > > Thank you for the reply. > > Are these internal company standards (I’m thinking for procurement and > quality purposes) that you are referring to? > > Are you aware of any legal / mandatory standards that call it up? > > All the best > James > > > > From: Robert Kado <[email protected] > <mailto:[email protected]>> > Sent: 02 February 2021 14:48 > To: James Pawson (U3C) <[email protected] > <mailto:[email protected]>> > Cc: [email protected] <mailto:[email protected]> > Subject: Re: [PSES] ISO 7637-3 (automotive) > > We created the document specific to the transportation industry so > predominantly automotive but I am also aware of agriculture, truck & bus, and > even avionics/aerospace referencing it or utilizing it at times. > > Thank you. > > <image002.jpg> > Robert Kado > EMC Engineering & Laboratories > Sr Manager & Sr Technical Fellow > > 800 E. Chrysler Drive > CIMS 481-47-20 > Auburn Hills, MI, USA > Telephone: (248) 576 - 6915 > Mobile: (248) 467 - 0639 > [email protected] <mailto:[email protected]> > > > > On Tue, Feb 2, 2021 at 9:45 AM James Pawson (U3C) > <[email protected] <mailto:[email protected]>> wrote: > Hello experts, > > Does anyone know what standards call up or mandate the use of the automotive > standard ISO 7637-3 (coupling of noise onto non-supply lines)? > > There is nothing in R10.06 or ISO 7637-2 that I can see. > > Thanks in advance > James > > > > > James Pawson > Unit 3 Compliance Ltd > www.unit3compliance.co.uk > <https://protect-eu.mimecast.com/s/SK-7CvlMxuvzXR5cQov2S/> // +44(0)7811 > 139957 > 2 Wellington Business Park, New Lane, Bradford, BD4 8AL > Registered in England and Wales # 10574298 > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] <mailto:[email protected]>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > <http://www.ieee-pses.org/emc-pstc.html> > Attachments are not permitted but the IEEE PSES Online Communities site > athttp://product-compliance.oc.ieee.org/ > <https://protect-eu.mimecast.com/s/iSohCyo4AIY5npwUR4QHj/> can be used for > graphics (in well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > <https://protect-eu.mimecast.com/s/zlnHCzv84TKoL7ZfohpQK/> > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > <http://www.ieee-pses.org/listrules.html> > For help, send mail to the list administrators: > Scott Douglas <[email protected] <mailto:[email protected]>> > Mike Cantwell <[email protected] <mailto:[email protected]>> > > For policy questions, send mail to: > Jim Bacher <[email protected] <mailto:[email protected]>> > David Heald <[email protected] <mailto:[email protected]>> > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] <mailto:[email protected]>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > <http://www.ieee-pses.org/emc-pstc.html> > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ > <https://protect-eu.mimecast.com/s/iSohCyo4AIY5npwUR4QHj/> can be used for > graphics (in well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > <https://protect-eu.mimecast.com/s/zlnHCzv84TKoL7ZfohpQK/> > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > <http://www.ieee-pses.org/listrules.html> > For help, send mail to the list administrators: > Scott Douglas <[email protected] <mailto:[email protected]>> > Mike Cantwell <[email protected] <mailto:[email protected]>> > > For policy questions, send mail to: > Jim Bacher <[email protected] <mailto:[email protected]>> > David Heald <[email protected] <mailto:[email protected]>> > > > Disclaimer > > This email is sent on behalf of Element Materials Technology Group Limited or > the relevant group company with which you are dealing (together, Element). > Element Materials Technology Group Limited is a limited company registered in > England and Wales with registered number 09915743. Its registered office is > at 5 Fleet Place, London, England, United Kingdom, EC4M 7RD and its principal > place of business is at 10 Lower Grosvenor Place, London, England, United > Kingdom, SW1W 0EN. > > Element cannot accept responsibility for any loss or damage sustained as a > result of viruses or malware and the recipient must ensure that the email and > attachments are virus and malware free. Emails and attachments are opened at > your own risk. > > The information transferred is intended only for the person or entity to > which it is addressed and may contain confidential and/or privileged > material. Transmission of this email is not intended to waive confidentiality > and/or privilege. > > The contents of this email are subject to contract and do not contain an > offer that is capable of acceptance. Unless otherwise agreed in writing with > you, the Element Standard Terms of Business for the relevant group company > apply in respect of any services provided to you, including advice given to > you by email. The Standard Terms of Business are available on request and can > be found at https://www.element.com/terms/terms-and-conditions > <https://www.element.com/terms/terms-and-conditions> > > For information about how we process data and monitor communications please > see our Privacy statement at https://www.element.com/terms/privacy-statement > <https://www.element.com/terms/privacy-statement> - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] <mailto:[email protected]>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > <http://www.ieee-pses.org/emc-pstc.html> > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ > <http://product-compliance.oc.ieee.org/> can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > <http://www.ieee-pses.org/listrules.html> > For help, send mail to the list administrators: > Scott Douglas <[email protected] <mailto:[email protected]>> > Mike Cantwell <[email protected] <mailto:[email protected]>> > > For policy questions, send mail to: > Jim Bacher <[email protected] <mailto:[email protected]>> > David Heald <[email protected] <mailto:[email protected]>> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
