Hi Daniel The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 amend the Supply of Machinery (Safety) Regulations 2008 as follows:
Amendment to Schedule 2 Part 2 Annex II 24.—(1) Schedule 2 Part 2 Annex II (Declarations) is amended as follows. (2) In Section 1 Part A (EC Declaration of conformity of the machinery)— (a) in the heading and in the third paragraph omit “EC”; (b) in point 2 omit “, who must be established in an EEA state”; Point (b) removes the obligation for the person who is authorised to compile the technical file to be based in Europe, but does not replace it with an obligation for them to be based in the UK. So as things stand at present, they could be located anywhere, world wide. It’s not clear whether this is an oversight by the UK Government when they drafted the amending Regulations or if it was intentional. Best Regards Chris Wordley Senior Consultant email: chris.word...@conformance.co.uk Direct Line: 01298 873817 Mobile: 07856 520321 Join us for CE marking training - Click here to see our scheduled courses for 2021 <https://www.conformance.co.uk/our-services/ce-marking-training-risk-assessment> Conformance Limited. The Old Methodist Chapel, Great Hucklow, Buxton, SK17 8RG England Tel. +44 1298 873800, Fax. +44 1298 873801, www.conformance.co.uk <http://www.conformance.co.uk/> Registered in England, Company No. 3478646 > On 15 Apr 2021, at 08:04, Rodriguez, Daniel (ESP) > <0000123de38bd494-dmarc-requ...@listserv.ieee.org> wrote: > > Good morning everybody > I have a question related to information of person to contact for technical > file for equipment placed in UK according to Supply of Machinery (Safety) > Regulations 2008 that needs to be indicated in the UK DoC > If the UK legislation is similar to Machinery Directive, this person should > be in the UK. But I have found the following link that indicates that can be > everywhere > > Can someone confirm the legislation link behind this ? > Thank you for your support! > > https://www.machinebuilding.net/brexit-implications-for-machine-builders > <https://www.machinebuilding.net/brexit-implications-for-machine-builders> > “Whereas CE marking requires a person established in the EEA to be named on > the DoC or DoI, there is no such requirement in the draft ‘Mega SI’ > (statutory instrument) that is converting much EU law into UK law > post-Brexit; in fact, the person authorised to compile the technical file can > be anywhere in the world. The technical file must, however, be in English” > > > Kind Regards / Saludos cordiales / Mit freundlichen Grüßen > > Daniel Rodríguez > Sr. Equipment Compliance Specialist EMEA > T +34 673556249 > E drodrig...@ecolab.com <mailto:drodrig...@ecolab.com> > ecolab.com <http://ecolab.com/> > > CONFIDENTIALITY NOTICE: This e-mail communication and any attachments may > contain proprietary and privileged information for the use of the designated > recipients named above. Any unauthorized review, use, disclosure or > distribution is prohibited. If you are not the intended recipient, please > contact the sender by reply e-mail and destroy all copies of the original > message. > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <emc-p...@ieee.org <mailto:emc-p...@ieee.org>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > <http://www.ieee-pses.org/emc-pstc.html> > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ > <http://product-compliance.oc.ieee.org/> can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > <http://www.ieee-pses.org/listrules.html> > For help, send mail to the list administrators: > Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org>> > Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org>> > > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org>> > David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com>> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
