Scott, The MDoC and other public references to standards used become an overload in the supplied documentation. The better route is to incorporate these references, detailing by clause and/or whatever limitation you have applied, in your Technical File which supports the claim of meeting EN ISO 12100 in the MDoC and manual provided.
:>) br, Pete Peter E Perkins, PE Principal Product Safety & Regulatory Affairs Consultant PO Box 1067 Albany, ORe 97321-0413 503/452-1201 IEEE Life Fellow IEEE PSES 2020 Distinguished Lecturer <http://www.researchgate.net/Peter%20Perkins> www.researchgate.net search my name <mailto:[email protected]> [email protected] Entropy ain’t what it used to be From: Scott Xe <[email protected]> Sent: Tuesday, May 4, 2021 7:51 AM To: [email protected] Subject: [PSES] EU Machinery Directive 2006/42/EC for motorized adjustable height table It applies the harmonised standard EN ISO 12100 to assess the product for the compliance of MD. In the conformity report, it validates each clause using a few standards such as EN 60335-1, EN 527, EN 55014-1:2017+A11:2020, EN 61000-3-2:2019, EN 62233 : 2008 etc. Is it necessary to quote all the standards or just EN ISO 12100 only in the DoC inside the instructions manual? Thanks and regards, Scott - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
