Dear members, We have a Short Range Device transmitter and corresponding receivers we install in various enclosures for which we have test reports from different US labs. Transmitter power is less than 10mW and uses the 2.4GHz band. The various reports issued show the ETSI EN 301 489-1 V1.9.2 as one of the standards to which they were tested. The other is EN 300 440 V2.1.1.
* My question is how do we show this ETSI standard in the RED Declaration of Conformity when this standard is listed only in the OJEC under the EMC Directive? Many RED guidance articles mention the EMC Directive should not be identified in the RED DoC. Is it OK to list this ETSI standard under the RED Directive-I am afraid it would be misleading or raise a red flag. (pun unintended). Instead of this ETSI standard, should we list the EN 55035:2017 standard instead, which is published in the OJEC under the RED? I would appreciate your valuable advice. Sincerely Yours, Ryan Jazz Ryan Jayasinghe Regulatory Compliance Engineer rjayasin...@line6.com<mailto:rjayasin...@line6.com> "After silence, that which best expresses the inexpressible, is music" - Aldous Huxley LINE6 26580 Agoura Road Calabasas CA 91302 818.575.3711 line6.com ampeg.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>