You may find this article from UL helpful: https://code-authorities.ul.com/wp-content/uploads/sites/40/2015/02/UL_WP_Final_Effects-of-High-Frequency-Voltage-Stress-on-Air-Insulation-and-Solid-Insulation_v4_HR.pdf
On Thu, Aug 18, 2022 at 12:59 PM Gert Gremmen <g.grem...@cetest.nl> wrote: > Dear Bart, > > As the input is within the LVD limit, the whole equipment is. > > EN 61326-1 comes to mind for EMC > > EN 61010-1 for electrical safety > > The output is just a "circuit" (in terms of 61010) and clearance and > creepage requirement (up to 60 kV) are given in Table 6 and 7 > > There are more requirements than just clearance and creepage. > > Good luck in making your equipment safe. > > Gert Gremmen > > > On 18-8-2022 21:43, bart.de.gee...@telenet.be wrote: > > Dear experts, > > > > A client is looking for regulatory guidance to CE certify a high voltage > output supply (with regular AC mains 230V/50Hz input). > > The supply has an output voltage upto 25kV (upto 50kHz) output. It > concerns a supply to be used for plasma reactor applications. > > > > As the output voltage is not inside the voltage limits for the Low > Voltage Directive, the LVD directive is not applicable? > > The Machine Directive also excludes these high voltage products. > > > > So, wondering which Directive to apply related tot he safety testing > part. (The General Safety Product Directive?) > > Any suggestions as to which safety standard to apply for such products? > > > > Any suggestions are highly appreciated. > > > > Thanks ! > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org> > David Heald <dhe...@gmail.com> > ------------------------------ > > To unsubscribe from the EMC-PSTC list, click the following link: > https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 > > -- > Independent Expert on CE marking > EMC Consultant > Electrical Safety Consultant > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org> > David Heald <dhe...@gmail.com> > ------------------------------ > > To unsubscribe from the EMC-PSTC list, click the following link: > https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 > -- Scott Aldous | Regulatory Compliance Manager | scottald...@google.com | 650-253-1994 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1