Hi Peter,
The below page indicates which labels exist: <https://europa.eu/youreurope/business/product-requirements/labels-markings/index_en.htm> https://europa.eu/youreurope/business/product-requirements/labels-markings/index_en.htm How do you affix the CE label: The CE marking must be visible, legible and indelible. The CE marking must consist of the initials "CE", both letters should have the same vertical dimension and be no smaller than 5mm (unless specified differently in the relevant product requirements). If you wish to reduce or enlarge the CE marking on your product, you should respect the proportions of the two letters. As long as the initials remain visible, the CE marking can take different forms (for example colour, solid or hollow). If the CE marking cannot be affixed to the product itself, you can affix it to the packaging if there is any, or to any accompanying documents. If your product is subject to several EU directives/regulations which require a CE marking to be affixed, the accompanying documents must indicate that your product conforms to all applicable EU directives/regulations. So I guess e-labelling a product is not sufficient. Maybe there are other opinions… Greetings, Bart From: [email protected] <[email protected]> Sent: maandag april 2023 5:14 To: [email protected] Subject: [PSES] e-Labeling Hello group, Does anyone know if EU accepts e-Labeling for IT products? Thank you Peter - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
