Thanks for sharing this, Charlie. Best Regards, -Lauren
From: Charlie Blackham <[email protected]> Sent: Friday, April 19, 2024 3:09 AM To: [email protected] Subject: [PSES] UK The Product Safety and Metrology etc. (Amendment) Regulations 2024 External Email: Do NOT reply, click on links, or open attachments unless you recognize the sender and know the content is safe. If you believe this email may be unsafe, please click on the "Report Phishing" button on the top right of Outlook. UK has published draft legislation to allow continued acceptance of CE Marking past the end of 2024 in the "The Product Safety and Metrology etc. (Amendment) Regulations 2024" along with an explanatory memorandum. The law is due to come into force on 1st October ahead of the current 31 December deadline. The Product Safety and Metrology etc. (Amendment) Regulations 2024 (legislation.gov.uk)<https://www.legislation.gov.uk/ukdsi/2024/9780348260311/resources> Best regards Charlie Charlie Blackham Sulis Consultants Ltd Mead House Longwater Road Eversley RG27 0NW UK Tel: +44 (0)7946 624317 Email: [email protected]<mailto:[email protected]> Web: https://sulisconsultants.com/ Registered in England and Wales, number 05466247 ________________________________ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected]<mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe)<https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected]<mailto:[email protected]> Rick Linford at: [email protected]<mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected]<mailto:[email protected]> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files, or previous e-mail messages attached to it, (collectively, "E-mail Transmission") may be subject to one or more of the following based on the associated sensitivity level: E-mail Transmission (i) contains confidential information, (ii) is prohibited from distribution outside of Lam, and/or (iii) is intended solely for and restricted to the specified recipient(s). If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this message is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify the sender and destroy the original transmission and its attachments without reading them or saving them to disk. Thank you. Confidential - Limited Access and Use - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
