Scott The Ecodesign Directive applies to products within scope of a Commission Regulation implementing Directive 2009/125/EC
These products must then be labelled in accordance with the relevant Commission Delegated Regulation on how to energy label that product. You don’t declare compliance with a labelling method, you just label in accordance with it. Lists of relevant Regulations at https://energy.ec.europa.eu/topics/energy-efficiency/energy-label-and-ecodesign/list-energy-efficient-products-regulations-product-group_en Best regards Charlie Charlie Blackham Sulis Consultants Ltd Tel: +44 (0)7946 624317 Web: https://sulisconsultants.com/ Registered in England and Wales, number 05466247 From: Scott Xe <[email protected]> Sent: Saturday, June 1, 2024 2:33 AM To: [email protected] Subject: [PSES] Declaration of Conformity Hello Experts, According to the Ecodesign Directive (EU) 2009/125, manufacturers must draw up a declaration of conformity for covered products. However, the Energy Labelling Regulation (EU) 2017/1369 does not explicitly mention this requirement. Is a declaration of conformity also mandatory for products covered under the Energy Labelling Regulation (EU) 2017/1369 as part of the compliance process? Cheers, Scott ________________________________ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected]<mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/<https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe)<https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected]<mailto:[email protected]> Rick Linford at: [email protected]<mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected]<mailto:[email protected]> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
