Hi all,
We've had a few things in the lab recently requiring motor locked rotor and motor overload testing. Working on the principle that a locked rotor motor looks like a short circuit (inductance and DC resistance of winding) would it be reasonable to just substitute the motor with the equivalent circuit? For an overload testing (steadily increasing the load on the motor drive until failure or trip) I'm not sure how best to practically do this. How do people achieve these tests practically in the lab? What equipment is used? Any recommendations gratefully received. All the best James James Pawson Managing Director & EMC Problem Solver Unit 3 Compliance Ltd EMC : Environmental & Vibration : Electrical Safety : CE & UKCA : Consultancy <http://www.unit3compliance.co.uk/> www.unit3compliance.co.uk | <mailto:[email protected]> [email protected] +44(0)1274 911747 | +44(0)7811 139957 2 Wellington Business Park, New Lane, Bradford, BD4 8AL Registered in England and Wales # 10574298 Office hours: Every morning my full attention is on consultancy, testing, and troubleshooting activities for our customers' projects. I'm available/contactable between 1300h to 1730h Mon/Tue/Thurs/Fri. For inquiries, bookings, and testing updates please send us an email on <mailto:[email protected]> [email protected] or call 01274 911747. Our lead times for testing and consultancy are typically 4-5 weeks. -- This email has been checked for viruses by AVG antivirus software. www.avg.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
