Their goal appears to be focused on RF emissions only, but they are aware of low frequency phenomenon like power line harmonics and flicker.
Ralph From: John Woodgate <j...@woodjohn.uk> Sent: November 27, 2024 12:10 PM To: rmm.priv...@gmail.com Subject: Re: [PSES] pre-compliance EMC test equipment - emissions only What about low-frequency conducted emissions, IEC 61000-3-2, -3, -11 and -12? I know some don't apply in US, but they do in adjacent countries and elsewhere. In general, equipment from 'second rank' makers are good for pre-compliance and the cost savings are significant. Also, in academia, I suppose test time is not so significant as it is in industry. On 2024-11-27 19:54, Ralph McDiarmid wrote: An Adjunct Professor at UBC is looking for advice on what equipment would be appropriate for pre-compliance emissions testing, radiated and conducted emissions, using the procedures from std CISPR 22 . I don’t know the budget, but I suggested to him that is an important criterion. UBC has a 3 metre semi-anechoic EMC chamber on-site. Thanks everyone, Ralph McDiarmid Vancouver, BC _____ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/emc-pstc@listserv.ieee.org/ <https://www.mail-archive.com/emc-pstc@listserv.ieee.org/%20> Website: https://ewh.ieee.org/soc/pses/ <https://ewh.ieee.org/soc/pses/> Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: msherma...@comcast.net <mailto:msherma...@comcast.net> Rick Linford at: linf...@ieee.org <mailto:linf...@ieee.org> For policy questions, send mail to: Jim Bacher at: j.bac...@ieee.org <mailto:j.bac...@ieee.org> _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 -- OOO - Own Opinions Only Best Wishes John Woodgate Keep trying <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to EMC-PSTC@LISTSERV.IEEE.ORG All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/emc-pstc@listserv.ieee.org/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: msherma...@comcast.net Rick Linford at: linf...@ieee.org For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
