Doug, > 1+ Volt peak-to-peak spikes on the scope at the fundamental switching frequency of the power supply. > What is the first thing you do?> Doug Smith 1st thing I'd do is connect both probes together at each P.S. terminal, one at a time, and see if the noise goes away.If it doesn't, that 1Vpp reading is due to your measurement set up. It's a baby step, but it's served me in the past. Colorado Brian
- ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
