All, There is a Fact Sheet available here: https://ec.europa.eu/commission/presscorner/detail/en/fs_23_1663
Here’s the link to the EU Raw Materials Registration System: https://rmis.jrc.ec.europa.eu <https://rmis.jrc.ec.europa.eu/> Doug Nix Kitchener, Ontario, Canada [email protected] +1 (519) 729-5704 > On Mar 21, 2025, at 10:47, Lauren Crane > <[email protected]> wrote: > > Hello Experts, > > Just banging this gong in case you would like to know, and don’t yet… the EU > has gifted us the Critical Raw Materials Act (regulation 2024/1252), which > among many other things, requires electric motors containing magnets (e.g., > stepper motors), and products containing such motors, to be particularly > labeled, CE marked, have data carriers, etc… But they sneak in a scope > limitation via definition of electric motor, limiting it to motors with a > rated output equal to or above 120watts. > > Best Regards, > -Lauren Crane > > LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any > documents, files, or previous e-mail messages attached to it, (collectively, > "E-mail Transmission") may be subject to one or more of the following based > on the associated sensitivity level: E-mail Transmission (i) contains > confidential information, (ii) is prohibited from distribution outside of > Lam, and/or (iii) is intended solely for and restricted to the specified > recipient(s). If you are not the intended recipient, or a person responsible > for delivering it to the intended recipient, you are hereby notified that any > disclosure, copying, distribution or use of any of the information contained > in or attached to this message is STRICTLY PROHIBITED. If you have received > this transmission in error, please immediately notify the sender and destroy > the original transmission and its attachments without reading them or saving > them to disk. Thank you. > > Confidential – Limited Access and Use > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > [email protected] <mailto:[email protected]>All emc-pstc > postings are archived and searchable on the web at: > https://www.mail-archive.com/[email protected]/ > > Website: https://ewh.ieee.org/soc/pses/ <https://ewh.ieee.org/soc/pses/> > Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to > unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> > List rules: > https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf > > For help, send mail to the list administrators: > Mike Sherman at: [email protected] <mailto:[email protected]> > Rick Linford at: [email protected] <mailto:[email protected]> > For policy questions, send mail to: > Jim Bacher at: [email protected] <mailto:[email protected]> > To unsubscribe from the EMC-PSTC list, click the following link: > https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
