Hi Everyone, Current probes are very useful in EMC and EMC work and have been one of my engineering interests for about 40 years now since I attended a Henry Ott EMC lecture a long time ago.
I have never designed current probes but generally know the principles. Lately. I have been building some using ferrite cores like the ones we use in EMC mitigation, and would like to compare notes with anyone who designs current probes in their job. Are there any members of the group who design current probes for EMC work? I would like to get in touch. I built up a calibration fixture and was surprised at how well a ferrite core seems to work as a current probe, very flat response, if attention is paid to winding and shielding design geometry. Doug Smith Sent from my iPhone IPhone: 408-858-4528 Office: 702-570-6108 Email: [email protected] Website: http://dsmith.org - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
