They do sell an expansion card that you plug into your single pci slot to bring it out to two individual slots at 90 degrees above the board.
Kyle Kent A. Reed wrote: > Stan: > > Other replies suggest this board will work perfectly well as-is, but > let's suppose for a moment that it was known not to. Instead of looking > for a graphics-card solution, you could always consider getting two of > these boards---the first to run EMC and the second to run an X-server > against the first. Not so long ago in the evolution of computers > so-called "thin client" X-terminals were all the rage. You'd just be > making yours a little "thicker" by packaging it in the same enclosure > with its not-so remote host:-) > > Regards, > Kent >> Date: Thu, 23 Nov 2006 09:22:32 -0500 >> From: Stan Blosser <[EMAIL PROTECTED]> >> Subject: [Emc-users] VIA based Mini-ITX >> To: [email protected] >> Message-ID: <[EMAIL PROTECTED]> >> Content-Type: text/plain; charset=ISO-8859-1; format=flowed >> >> Has anyone ever used one of these little guys to run EMC? I'm mainly only >> concerned about the floating point math necessary to run EMC. I'm currently >> running on a PIII 1GHz with zero problems (at least on the PC side of >> things). I'm considering going in a different directions with the controls >> and one of these would fit perfectly into my design ideas. >> >> Specifically, I'm looking at: >> http://www.newegg.com/Product/Product.asp?Item=N82E16813153053 >> >> The plan is to add parallel ports through the addition of a PCI card, and >> boot from a CF card plugged into a CF-to-IDE adapter. >> >> Any thoughts would be appreciated! >> >> >> >> > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
