Why python? If it is because you already know python, then I'd suggest you
start by examining AXIS. My guess is that everything you need is in there.
[Sort of like making a sculpture of a horse. Take a piece of stone and
remove everything that isn't a horse.] :-)
I'm sure that cradek and jepler can provide more direction.
Ken
[EMAIL PROTECTED]
Mark Kenny Products Company, LLC
55 Main Street Voice: (203)426-7166
Newtown, CT 06470 Fax: (203)426-9138
http://www.MarkKenny.com
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Glenn R.
Edwards
Sent: Friday, December 29, 2006 1:34 PM
To: [email protected]
Subject: [Emc-users] Command-line interface to EMC2
Dear fellow EMC users and developers,
Several months ago I asked a question about remote control of EMC. I
received many excellent responses - thank you all.
As the system architecture progresses, it has become clear (or clearer)
that what I need is the ability run EMC2 from within a Python shell program
(or supervisory program) running on the same computer as EMC2. The shell
program will start/stop EMC2 (not necessary, but nice-to-have), deliver an
" *.ngc" file to EMC2 and have EMC2 execute that file (necessary) and get
status reports from EMC2 (necessary).
I have researched emcsh and emcsvr , but have come to dead-ends on both
topics. Does anyone have any ideas on where to start my research? Thanks!
I sense that I am just emulating a GUI (or precluding the use of one), of
which there are many excellent ones that have been developed for EMC2.
Best regards,
-- --
Glenn Edwards
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
