It's a bit hard to have all possible examples included in the emc2 distribution. On the other hand things are very nicely explained in the User Manual (included already) so it shouldn't be too hard to set things up as you need them.
Regards, Alex ----- Original Message ----- From: "Jack Ensor" <[EMAIL PROTECTED]> To: "EMC" <emc-users@lists.sourceforge.net> Sent: Saturday, February 24, 2007 10:24 PM Subject: [Emc-users] Emc examples missing? >I couldn't find an example emc setup in the EMC2 distribution that I >could use > very readily for my particular setup. > > What I have is a Bridgeport which has an old "Bandit" CNC. I intend > to salvage > its stepper drivers which each require a quadrature input along with > an enable > signal. Therefore, I am looking for an example which outputs these > signals from > two parallel ports. > > Is something like this available? > > Jack Ensor > > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
