John, On Feb 28, 2007, at Feb 28, 2007--2:55 PM, emc-users- [EMAIL PROTECTED] wrote:
> Jack Ensor wrote: >> I originally down loaded and installed the Live EMC2 CD back in >> the early part >> of January. So when I recently learned there was an upgrade >> available, I down >> loaded what I have (emc2.1.1.tar.gz). Did I down load the wrong >> thing? > > John Kasunich wrote: > Yeah, but no harm done. > > I'm not sure whether you have the version 2.1 or 2.0 live CD. If you > have 2.1, it should have automatically prompted you to update to 2.1.1 > already (a little orangish icon will appear in on the right of the > taskbar for any updates, not just EMC updates. > > If you have 2.0, updates to 2.1 are not automatic, but are still > pretty > simple - just follow these instructions: > > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?UpdatingTo2.1 > > Regards, > > John Kasunich The problem with automatic update is that you have to have internet to the machine that your running EMC2 on. My machine is out in the shop and I don't have access to the internet out there. So I either have to build from source, download a new LiveCD when available, or bring the machine into the house and hook it up to the internet, do the updates and then take it back out to the shop. Regards, Alan --- Alan Condit 1085 Tierra Ct. Woodburn, OR 97071 Email -- [EMAIL PROTECTED] Home-Office (503) 982-0906 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
