Jack, I have drivers for bi-polar motors. See:
http://www.probotix.com/stepper_motor_drivers/SideStep And just to be fair, you should look at the Xylotex & AlienCNC drivers. You will also find a number of other bi-polar drivers on eBay. >Len -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jack Sent: Saturday, May 26, 2007 9:02 AM To: 'Enhanced Machine Controller (EMC)' Subject: [Emc-users] Low end stepper driver controller? Ok, I'm cheap. ... I have some small surplus 4 wire steppers. ((Nipon Pulsemotor, 2A/phase 1.7 Ohms/phse. Type PJ55P1U36B)). Where can I find a cheap controller (kit or prebuilt) that will drive these? Yes, I want to use EMC. I have a HobbyCNC controller, but it doesn't drive this kind of motor, and when asked on that forum, I am nicely told to go away. TIA, Jack ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
