On Sat, Jul 07, 2007 at 12:29:13PM -0700, Kirk Wallace wrote: > >From the videos on the lathe threading wiki page: > > http://www.linuxcnc.org/content/view/35/13/lang,en/ > > I can see that single point threading with a normal EMC lathe setup is > doable. But what about rigid tapping?
You can read the details of the EMC2 rigid tapping cycle here: <http://www.linuxcnc.org/docs/devel/html/gcode/main/index.html#SECTION00340000000000000000> It does not require exact spindle control. If you can command +300 RPM and then -300, and get a nice clean reversal, it will work fine. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
