Thanks for the reply John. I am looking for panel mount. The density is good on the ones in your link, but they are almost two inches wide. I stumbled across these at digikey:
http://www.molex.com/cmc_upload/0/000/865/824/3910008XX.pdf I may try to make these work. Thanks (I suppose, if I converted my mill to EMC, I could make my own terminal strips) Kirk Wallace ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ On Tue, 2007-07-17 at 15:57 -0400, John Kasunich wrote: > Kirk Wallace wrote: > > I need to make wire terminations on .25 inch or less spacing for my > > encoders and limit switches. I have found datasheets on .25 inch barrier > > and NEMA strips, but I haven't found a supplier yet. Does anyone have a > > favorite high density terminal system and supplier? > > Chassis or board mount? > > For chassis mount, I prefer DIN rail stuff, like the ones along the > bottom of this pic: > > http://jmkasunich.dyndns.org/shoptask/power-input-front.jpg > ... snip ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
