I suppose you could adapt some of these: http://www.machinetoolhelp.com/Applications/Haas_G-M-codes.html
the parts chute one is there. Good luck! Dave On Jul 21, 2007, at 8:41 PM, Kirk Wallace wrote: > I need to start thinking about how to handle some of the remaining > issues with my Hardinge lathe. Some of the items on my todo list: > > Spindle Lock Pin > It has a micro-switch to sense engagement. > > I could tie it to the e-stop chain, but that seems a > little drastic. > I would like to display a message and lockout certain events. > > Cutoff Slide > It has an extend SSR, retract SSR and limit switch. > > I need a new g-code or use an m1xx? > > Collet Closer > It has an open SSR and close SSR > > I need a new g-code or use m1xx? > > Part Chute > It has an extend SSR > > I need a g-code or use m1xx? > > I am planning on hooking up the SSR's to a second parallel port. Then > telling HAL to connect the pins to signals is pretty straight forward. > The trick is in what functions to connect the signals to. I could > really > use some pointers on what methods are used to create custom installs, > new g-codes, etcetera. The document: > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?ToolChangerImplementation > mentions making changes to tkio and iosh, but looking at these > files is > like watching the circus through a peep hole, its hard to get the > whole > picture. Thanks. > > Kirk Wallace > > > > ---------------------------------------------------------------------- > --- > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and a > browser. > Download your FREE copy of Splunk now >> http://get.splunk.com/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
