Kirk Wallace wrote: >Other than obviously enabling the AXIS interface, what is the power >button meant to do? > > Actually, it doesn't enable the interface - that's a side effect ;) EMC2 has three states of being (some poorly named, but I won't get into that): 1) ESTOP - EMC2 will not command any motion, and it holds its e-stop output asserted. 2) ESTOP-Reset - EMC2 will not command any motion, but it does not assert the e-stop output. 3) Machine On - in this state, the machine is expected to be able to perform motion, and EMC2 will operate normally
Pressing F1 or the EStop button toggles from ESTOP to ESTOP-Reset Pressing F2 or the "power on" button toggles from ESTOP-Reset to Machine On, or has no effect if the machine is in ESTOP I think there's more information on estop and machine modes, but this should be a "close enough approximation" for now :) - Steve >Kirk Wallace > > ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users