I don't believe its here, cuz what I see in my ini file (Display section) is:
############################################################################### # Sections for display options ############################################################################### [DISPLAY] #+ Name of display program, e.g., xemc DISPLAY = axis # DISPLAY = usrmot # DISPLAY = mini # DISPLAY = tkemc # Cycle time, in seconds, that display will sleep between polls CYCLE_TIME = 0.200 INCREMENTS = 0.0004 0.001 0.01 0.1 #- Path/name of help file # HELP_FILE = tkemc.txt #- Initial display setting for position, RELATIVE or MACHINE POSITION_OFFSET = RELATIVE #- Initial display setting for position, COMMANDED or ACTUAL POSITION_FEEDBACK = ACTUAL #+ Highest value that will be allowed for feed override, 1.0 = 100% MAX_FEED_OVERRIDE = 1.2 #- Prefix to be used #PROGRAM_PREFIX = /usr/share/emc/ncfiles/ Changed 7/7/07 to my folder PROGRAM_PREFIX = /home/jack/emc2/nc_files/MyStuff/ #- Introductory graphic INTRO_GRAPHIC = emc2.gif INTRO_TIME = 5 I would expect to see a line denoting the .ngc file to load upon opening Axis, but I don't. It always loads the demo file Axis.ngc and I don't see a line in the ini file that specifies it either. Jack Ensor Gene Heskett wrote: >On Monday 03 September 2007, Jack Ensor wrote: > > >>With the Emc2 stock setup using the Axis GUI, the startup file is >>axis.ngc. Where is the startup file designated so that I may designate >>something else? >> >>Jack Ensor >> >> >> >That's in the ~/emc2/config/method(stepper etc)/*.ini file, Jack > > > ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
