On Sun, Oct 07, 2007 at 12:19:04AM -0700, Kirk Wallace wrote: > > and with or without the g41 the AXIS tool cross-hair follows the contour > and not the tool outline.
I could not test your program right now but I think I see the problem. The crosshair will always follow the plot. When using compensation the plot changes to represent the compensated path of the tool origin. What I did when I wanted to see the compensation was to remove the G41 (or use G41 D0) and run the program. Then without clearing the backplot, I put the G41 back and reloaded to generate a new preview. Then it's easy to see the compensation, and when running the program again you can see the tool radius following the old (uncompensated) path. Chris ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
