Thank you very much,
your blog are very interesting...........
My weekend will be a full immersion to understand all infos !!!
Great work with EMC............
Francesco Tommasini
Vinci
Florence
Italy
----- Original Message -----
From: "Anders Wallin" <[EMAIL PROTECTED]>
To: "Enhanced Machine Controller (EMC)" <[email protected]>
Sent: Friday, January 04, 2008 7:22 PM
Subject: Re: [Emc-users] Pendant and tool zeroing...
>> Hallo,
>> I'm looking for a HAL and HW config to install a pendant in EMC2.
>
> I have some notes in my blog:
> http://www.anderswallin.net/2006/11/jogging-emc2/
>
> The HW and HAL configuration is of course entirely flexible, you don't
> have to do it the way I did it, it's just an example.
>
> AW
> (ps. anyone who feels this could be in the wiki please feel free to
> transfer over what is useful from my page
> ps2. anyone who has installed and used a jogwheel with emc2, please
> consider this a formal challenge to put up your HW and HAL config on the
> net. there are too few examples out there for newbies to look at!)
>
>
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
