Kirk Wallace wrote: > I played with the deadband a little at 1e-06 and 1e-05, but apparently > these numbers are way too small for my .0005" scales. Well, of course. ,0005" is 2000 counts/inch or 5e-4. Probably the deadband should be set to about 7.5e-4 to establish a mechanical zone where there will be no effort from the drive. You don't want it any larger as it will cut into machine accuracy.
Jon ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users