Stuart Stevenson wrote: > Gentlemen, > I purchased an evaluation board from Analog Devices. I will try > it. It is the eval-ad2s1200cbz. It is fully populated with a BUNCH of > stuff. Randy and I will work with it. The tech support said it will > work. Randy read the propaganda and said it will work. I will know > Monday evening. Don't be so sure. Resolvers are fairly tricky, and the signals coming back are typically pretty small, so you have to watch shielding and grounding carefully. I hope it is a simple drop in, but if not, you should be able to get it going without anything extreme. I'm kind of interested in these, so I would like to hear how it goes.
(If you want a minimal commercial board made for this, I'd be interested in working on it. Just resolver in, maybe a couple jumpers to set reference frequency, and some jumpers for the resolution.) Jon ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
