Hi Stuart I am very interesting in dynamic compensation. You say everything is possible but where it all any manual or list of how do that? Can I call directly and talk and say all what I think that EMC2 should do? Thanks aram
>> I think that EMC2 can become industry standard if it will oriented to >> the >> shop floor needs. >> I want to talk about of concept ?idea new requirements to EMC2 as I can >> see. >> My point of view as a employee of big machine shop. >> 1. EMC2 must be able to do 5 axis dynamic compensation. I think it >> is self >> explanatory. EMC2 should be able to use probe to heat the 3 points >> create >> plane square the machining axis accordingly and recomputed 5 axis path. >> Let me talk about. >> As right now many machine can do X Z and B axis dynamic compensation. >> Very view absolutely new machine can do 3 axis dynamics compensation. >> None of machine as I know can do 5axis dynamic compensation. >> How to do this? >> One way is to continue increase capability of controller on machine. >> Right >> now controller on machine can do B axis skew and move X and Z axis. What >> about move same direction? >> Add A axis skew and move XY and ZY axis compensation. >> That way will increase cost of controller, make controller more >> complicated and less reliable. >> I think it is wrong direction! >> Here is right direction as I can see. >> First, EMC2 is extension of CAD/CAM terminal. >> How it can be used in case of 5 axis dynamic compensation? >> CAD/CAM direct tool ?probe to the points on the part/fixture to heat or >> probe out. >> I recommend that after probe heat a part/fixture signal from probe must >> be >> sent to CAD/CAM terminal. CAD/CAM terminal will much faster recomputed >> new >> NC program and load again on controller. >> Controller on machine must be simple to be robust and less expensive. >> Controller must be seamlessly joint with CAD/CAM terminal. All >> calculation >> must be done on CAD/CAM and controller should transfer necessary data >> (probing of surface) to CAD/CAM terminal for re-computing and after >> that >> receive back NC program. >> >> This is first important part as requirements for EMC2. >> >> Thank you >> Aram >> > Aram, > EMC IS capable of 5 axis dynamic compensation. > EMC IS capable of probing the part and adjusting the program to > the part on the machine table - in the 5 axis world - in the many axis > world. > EMC IS capable of processing the part program through the CAD/CAM > system to utilize the tool geometry from the tool table. Five minutes > ago I visited with a man here about this very subject. He said we > could send a command to our Windows based CAD/CAM system, batch > process and post process the file, return the gcode file to the EMC > control. All this from the file load screen inside EMC. We will try to > get this working this week. My experience with him is - if he says it > is possible - he will do it. > Having some fun now. > thanks > Stuart > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
