With your settings it will take 20 mm to reach max speed. So 20mm to ramp up and 20mm to ramp down. Do a 60mm move and you sould "see" max speed in Axis. Don't forget that Axis does not update in realtime so it lags a bit behind. If your moves are short you don't have time to reach max speed. If you can increase your acceleration without loosing steps you can improve this.
John On 9 Feb 2008 at 18:51, [EMAIL PROTECTED] wrote: > My machine is set to to amax. speed of 4800 mm/min (~ 190 inch/min) > and an acceleration of 9600 mm/min. But somehow, during milling I > reach only speeds of up to 600 mm/min when doing small steps in the > program. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
