Dave I've got motors and drivers from http://www.motioncontrolproducts.com and was very pleased with price, service and range of choice.
Good luck Andy [EMAIL PROTECTED] wrote: > Just a quickie. > > Can anyone recommend a UK supplier of stepper motors and associated drive electronics? > eg just add mill, and computer running EMC. > > Mill is a light / middleweight Pinnacle universal job, XYZ travels are 400, 180, 150 mm with > quill head having separate raise / lower facility and rotation about X and Y axes too. > > Buying a DRO today with GS500 series glass scales (5 micron) from www.machine-dro.co.uk > so will hopefully be able to use output from linear scales as direct input into EMC computer, > (phase 2 of the upgrade) max rapid speed of the scales is allegedly vastly in excess of > anything I could need, so don't need 740 watt steppers... X table may weigh 200 lbs and > perhaps another 150 for Y table, not trying to pull high G accelerations and a rapid of 300 > mm per minute would be double what I'd be happy with. > > On a budget of course (aren't we all) but definitely prepared to pay a little more for something > not prone to glitches such as interference on power rails etc causing missed steps. > > Doing it this way appeals to me for two reasons. > > 1/ redundancy, can use linear scales with either EMC computer or standalone DRO at will. > > 2/ eliminates backlash and screw mapping etc, linear scales will measure actual position of > tables and quill. > > many thanks in advance. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
