Gentlemen,
I am installing EMC2 on a Cincinatti 5 axis. This is sooner than I
had planned. The timeframe is compressed. I work good under pressure.
It is usually caused by procrastination (mine). This is not the case
this time. I need to get the machine running by Friday of next week.
Any and all help/comments/opinions will be greatly appreciated.
The 5 axis tool length compensation is implemented with G43.1
instead of G43. This is no problem whatsoever. This is like the Fanuc
and Haas controls.
I would like to use the H number from the tool.tbl file with the
G43.1 in the same manner as the H number with the G43. I grepped the
directory and didn't find any reference to how the G43 and G43.1 were
implemented. Where would I find the code to change the usage?
thanks
Stuart
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
