Hi Folks,
I have a question regarding the new m5i2x HAL driver and its config tools. I
would like to reconfigure the whole FPGA core, because I need five-six
stepgens, five-eight encoders, two-four PWM generators and additional IOs.
I have found the new driver in the EMC 2.2.3 install package (...\EMC2\emc2-
2.2.3\src\hal\drivers\mesa_5i2x\)
and an older readme.txt at
http://cvs.linuxcnc.org/cgi-bin/cvsweb.cgi/~checkout~/emc2/src/hal/drivers/mesa_5i2x/firmware/Attic/README?rev=1.1.2.2;content-type=text%2Fplain
<http://cvs.linuxcnc.org/cgi-bin/cvsweb.cgi/%7Echeckout%7E/emc2/src/hal/drivers/mesa_5i2x/firmware/Attic/README?rev=1.1.2.2;content-type=text%2Fplain>
Is there any other documentation or sample files about it?
I think what John Kasunich did would be a great flexible tool, but I need a
kickstart to use it...
Thx,
Tamas Konya
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
