On Sat, 2008-03-08 at 09:03 -0800, Dale Ertley wrote: > Hello All, Does anyone have the knowledge and/or software to > decompile > the PAL (Programmable Application Logic) files from an Allen Bradley > 8400MP CNC control? I have the 2 files from the Hi and Low EPROMs. > They were saved as Hex, ASCI, and BIN files. The data from these > files would be a good starting place for developing a Classic Ladder > file now that I am upgrading my machine to EMC2. I have ordered a > Motenc board. Thank you Dale Ertley
What kind of machine are you converting? If the mechanics are not that complicated, I wonder if you would be better off starting from scratch. Sometimes a machine will have a number of separate simple systems that only look complicated if viewed as a whole. To me, it sounds like decompiling ROMs is complicated from the start. -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending) ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
