Hi Ben, Remember, Synergy does things differently. It writes code that is offset by cutter radius and also uses G41/G42. This means the tool table diameters need to be zero. Small deviations are then entered into the tool table to compensate for sharpening or small adjustments in dimensioning. I've not been successful in making that work so I just live with zero. If anyone knows how to make that work I'd be interested.
Synergy will let you rough with a tool that is tool big and then come back with a smaller tool and just cleanup the inside corners. Really a handy feature. HTH Dave On Mar 10, 2008, at 4:26 AM, Ben Dugan wrote: > > I'm pretty sure I've seen this asked before, but I couldn't find it in > the archives for this mail list. > > I'm running EMC2. I get this error on lines with G2 or G3 in them. > (The > code is output from Synergy). If I get this error, is there still a > setting (like INCH_TOLERANCE) that will relax the conditions that > produce this error? > > Also: is this affected by cutter diameter compensation settings, or by > relative vs incremental vs absolute modes? Google has showed me some > mention of this on other mail lists, but I fiddled with those settings > and couldn't resolve it that way. > > Is there a place in the documentation where I can read about this? > > Thanks in advance! > > Ben > > > > ---------------------------------------------------------------------- > --- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
