I am going to give it a go soon., once I get my EMC2 back up and running. Im thinking of a single wheel and either momentry buttons of a 4 pos slider to select the axis. Jason
On Fri, 2008-03-28 at 17:44 -0400, Gene Heskett wrote: > On Friday 28 March 2008, Jason Cox wrote: > >Gene, > > If memory servs me correctly these are just a4 pole stepper motor. more > >than likly 1.8 deg per step. you can get these of ebay or from old > >printers. > >Jason Cox > > I have some of those, and some even bigger ones, 50oz/in stuff, dunno if 4 > will fit in my project box though. H&R stuffs I've had laying around for a > while. I'll check those too. In fact first, cuz they are out & loose. > > >On Fri, 2008-03-28 at 16:22 -0400, Gene Heskett wrote: > >> I surveyed the drives I've squirreled away over the years, and it > >> seems I have > >> only one band drive model left with the little square motor. From the > >> feel > >> of that one, its a 96 tpi drive. > > > >------------------------------------------------------------------------- > >Check out the new SourceForge.net Marketplace. > >It's the best place to buy or sell services for > >just about anything Open Source. > >http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > >_______________________________________________ > >Emc-users mailing list > >Emc-users@lists.sourceforge.net > >https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
