Let me know if there is anything I can do to help. Tony
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:emc-users- > [EMAIL PROTECTED] On Behalf Of Sebastian Kuzminsky > Sent: Monday, March 31, 2008 9:57 PM > To: [EMAIL PROTECTED]; Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Mesa 5I20 in 72 bit parrallel mode > > Tony Bussan wrote: > > Yes, I want all the pins as I/O. > > How are you going to get around the counters and PWM's on the HostMot > > firmware to access the individual pins as I/O? That is why I suggested > > using the parallel mode firmware. > > I don't know anything about the old HostMot, I'm writing my driver for > the new HostMot2. In HostMot2 each I/O pin can be switched at runtime > between multiple functions, one of which is always GPIO. > > > -- > Sebastian Kuzminsky > If you need a machine today and don't buy it, > tomorrow you will have paid for it and not have it. -- Henry Ford > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketpla > ce > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
