> Message: 7
> Date: Fri, 04 Apr 2008 16:01:37 -0700
> From: Kirk Wallace <[EMAIL PROTECTED]>
> Subject: Re: [Emc-users] Resolution Adjustment for LCD Monitor
> To: "Enhanced Machine Controller (EMC)"
> <[email protected]>
> Message-ID: <[EMAIL PROTECTED]>
> Content-Type: text/plain
>
> On Sat, 2008-04-05 at 00:22 +0200, [EMAIL PROTECTED] wrote:
> > I downloaded EMC 2.2 and installed it okay. I am using the following
> hardware:
> >
> > http://www.newegg.com/Product/ProductPrint.aspx?Item=N82E16824254018
> >
> > The recommended resolution is 1440 x 900.
> >
> > The display is offset when I reboot the computer: I have to physically go
> into
> > the screen setup to restore the correct format.
> >
> > I tried to go into the resolution menu in EMC2 but there is no choice for
> > 1440x900.
> >
> > Does anyone have any idea on how I could fix this issue?
> >
> > Thank you,
> > Patrice
>
> I am not that good with Ubuntu, but I (sudo) edit /etc/X11/xorg.conf to
> add the resolution I need. Then Control-Alt-Backspace to reload X. I
> suppose your video card driver would need to support the resolution you
> want. The driver used is called out in xorg.conf.
>
> --
> Kirk Wallace (California, USA
> http://www.wallacecompany.com/machine_shop/
> Hardinge HNC lathe,
> Bridgeport mill conversion, doing XY now,
> Zubal lathe conversion pending
> Craftsman AA 109 restoration)
>
>
>
'sudo dpkg-reconfigure xserver-xorg' is the command to use
answer the questions - add the resolution you want - set the
default you want
this will write the configs into the xorg.conf file so if you have
anything in there you want to keep be sure to have a backup.
thanks
Stuart
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Register now and save $200. Hurry, offer ends at 11:59 p.m.,
Monday, April 7! Use priority code J8TLD2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
