Organic Engines wrote: > So Wayne, > > In your Devo (thread milling) Video are you concealing the sheet > heating, because it's truly high tech, or truly you don't want your wife > to see that you stole her hairdryer?
Haha. None of the above. The machine is home made, and we had so much trouble getting the heating uniform enough, the original setup got dumped after wasting a lot of material finding out what was wrong. In the end I bought a 3Kw ceramic heater designed for drying paint than happened to have the correct suface area. To QUICKLY test this out instead of the original rails which the heaters slid on, I arranged two sheets of ply vertical so that I could find the optimum distance between the sheet and the heaters without spend too much time. The comment is just a joke as of course you could see nothing when the heaters are in place. Wayne.... -- --------------------------------------------------------------------------- Wayne M Weedon Fdos Design Poole UK Email: [EMAIL PROTECTED] Tel +44-1202-677025 Fax +44-1202-770515 Mob 07774 439915 Skype fdosdesign Specialists in small batch & Production Mechanical/Electrical Engineering --------------------------------------------------------------------------- ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
