thank you, that does the trick > > try changing the sign of HOME_SEARCH_VEL > > more info here: > http://www.linuxcnc.org/docs/2.2/html/config_ini_homing.html > > > Hi, > > i'm new to emc, so sorry if my problem results in a total beginer mistake. > > > > The home switch of my machines z-axis is located at +85.0 mm. When I > > initialize the home-sequence for this axis, the machine allways drives in > > the wrong direction regardless of the value of HOME_OFFSET in the ini-file > > (HOME_OFFSET = 85.000000). The direction of the axis itself it correct, emc > > just searches the home switch in the wrong direction at 0.0 in stead of > > +85.0, at least for my machine setup. > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users _____________________________________________________________________ Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! http://smartsurfer.web.de/?mc=100071&distributionid=000000000066
smime.p7s
Description: S/MIME Cryptographic Signature
------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php
_______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
