I need to have the tool prep number output as a 4bit BCD
The machine already has a plc that will use that format (along with a start tool change output
and a finish tool change input )
I looked through the archives for an example but most are a swing arm type
tool changer mine is a carosel where the tool in the spindle will go back
to the pocket it came from
I am using a Mesa 5i20 card if that helps or not
Thanks in advance
Terry
---- Msg sent via CableONE.net MyMail - http://www.cableone.net
------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
