I use some Belden control cable left over from a lighting project. It's 10 or 12 conductors of 24 ga stranded wire. It doesn't melt near as bad as Cat 5 or phone wire. You might check with sound and lighting companies around town to see if they have any scraps. A 10' piece will last a good while.
Emory On Tue, Jul 8, 2008 at 3:09 PM, Kirk Wallace <[EMAIL PROTECTED]> wrote: > I have been using CAT-5 wire to solder up perfboard circuits, but the > insulation melts back. Does anyone have a favorite wire for > perfboarding? > > -- > Kirk Wallace (California, USA > http://www.wallacecompany.com/machine_shop/ > Hardinge HNC/EMC CNC lathe, > Bridgeport mill conversion, doing XY now, > Zubal lathe conversion pending > Craftsman AA 109 restoration > Shizuoka ST-N/EMC CNC) > > > ------------------------------------------------------------------------- > Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! > Studies have shown that voting for your favorite open source project, > along with a healthy diet, reduces your potential for chronic lameness > and boredom. Vote Now at http://www.sourceforge.net/community/cca08 > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
