Are there swivel joints between the two screws so that the motors can move independent of each other?
On Mon, 2008-07-14 at 20:54 +0700, Lie Seng-Thok wrote: > Hello, > > I just nearly completed the project of retrofitting of CNC router, > with tandem configuration on the Y-axes > > (i.e. 2 motors on the Y movemet). > > Can I get help from members who had done the setting of "homing" > sequence in HAL for this tandem YY? > > The controller used is univpwm system from Pico. > > I am relatively new to EMC2, and just would like to see the machine > start cutting ornamental wood design > > with subD and nurb surfaces. My bobby is woodworking. > > Thank you, > > Lie > > > ------------------------------------------------------------------------- > Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! > Studies have shown that voting for your favorite open source project, > along with a healthy diet, reduces your potential for chronic lameness > and boredom. Vote Now at http://www.sourceforge.net/community/cca08 > _______________________________________________ Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
