you might look at "A big DRO from Goslowjimbo" on http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?PyVCP may be of use due to changes over the years, may need some hacking TomP
On Thu, 2008-07-17 at 10:53 -0700, Kirk Wallace wrote: > On Thu, 2008-07-17 at 08:24 -0700, Terry wrote: > > I erased (by accident)the post for making the digital readout larger > > on axis > > > > could someone repost that line? > > > > Thanks > > > > Terry > > I found this in my old messages: > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > On Tue, Jul 08, 2008 at 12:56:27PM -0700, Kirk Wallace wrote: > > I would like to display the axes positions in larger numbers, and > > possibly with an inch/mm toggle. I made an X position pyVCP element on > > the AXIS display, but it doesn't change with Touch-Off. > > AXIS already has an inch/mm display toggle. > > To enlarge the font use something like > http://cvs.linuxcnc.org/cgi-bin/cvsweb.cgi/emc2/src/emc/usr_intf/axis/etc/axis_big_dro?rev=1.1 > in your X resources. We've talked about some ideas for a better way > to do this (like on a menu) but nobody has done it yet. > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
