Hi Aaron, With inside corners you will always get a fillet due to the radius of the cutter. You can reduce the problem by using a smaller cutter. If you are cutting a pocket for a sharp edged part to fit into, open the cut operation in SheetCam and go to the cut path tab. Turn on 'overcutting'. This will force the cutter into the corner but it will mean that you end up with a slight bulge either side of the corner.
Les aaron Moore wrote: > Hi > I am having problems with tool paths, The tool is not following the > tool-path right into the corners, rather it is 'filleting' the corners of a > pocket. I am using EMC 2.22 (right out of the box with no tweaks) and > SheetCamTNG-V0.0.35.deb, on a gantry style router. I do not know if it a > sheetcam or emc problem, but can anyone help me solve it. > Thanks > Aaron > > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
