El 09/09/2008 11:53 p.m., Kirk Wallace escribió:
On Tue, 2008-09-09 at 20:14 -0300, Richard Acosta wrote:
Hello, my name is Richard, and i´have bought a 7i43 board, wich i hope
to use on a home made drilling machine.

I´m stuck on the first steps, i have connected this board using
parallel port cable, set jumpers according to what manual says, so,
now i don't know what else to do.
... snip
Didn't understand.
You can use the Text Editor to edit your .ini and .hal files
(in /home/your_home/emc2/app_name/app_name.hal or load.hal) to add or
change the loadrt lines. It looks like you will need to have;
"loadrt hostmot2" and
"loadrt hm2_7i43 config= ..."
OK, that's one step forward.
These will load the drivers.....

Others on this list can provide better information. Good luck.

Thanks for your time.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to