If I remember correctly, in TurboCNC I needed to up the "PulseWidth" setting
above 50μs. EMC2 requests the following variables: Step Time, Step Space,
Direction Hold, Direction Setup. Not really sure how that would translate
over. Any advise?
On Sat, Sep 13, 2008 at 6:21 PM, John Kasunich <[EMAIL PROTECTED]>wrote:
> Lonnie Headley wrote:
> > A few months ago, I purchased an AIO-500 kit with motors from eBay user
> > "dsns". Everything is wired up as shown in the docs. The computer running
> > EMC2 is a Celeron 1.1 with 384MB of ram and parallel port is set to SPP
> in
> > BIOS if that matters. I have tested for max jitter and achieved
> satifactory
> > results (13500) for use with EMC2. I can spin the motors, but the
> movement
> > is extremely sporadic, almost as if they are binding. I have had TurboCNC
> > running on the same machine have smoothed everything out by adjusting the
> > pulse timing
>
> What did you adjust it to? Apply the same settings for EMC?
>
>
> > Here is the URL for the AIO-500:
> > http://www.dsns.com/shop/item.asp?itemid=84
>
> That is a pretty useless website. Photos of the product, videos, even a
> photo of the manual... but do they link to a _readable_ copy of the
> manual? Of course not.
>
> Regards,
>
> John Kasunich
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
