To add, when I run Engrave11, the GUI comes up, but there is only "QUIT" on the bottom and not "Sendto ... and Quit" as on the webpage. It does not generate Gcode and the text doesnt appear in the cursored Window.
[EMAIL PROTECTED] wrote: > Thanks Lawrence. > I missed the Fontfile import for Engrave11. > I am pretty sure that will work if I can use fonts from Linux fontservers. > > How do you compile a Python program again? > > > > > > Lawrence Glaister wrote: > >> I found the stick fonts that qcad and engrave-11 uses worked nicely for >> engraving panels with smaller labels (0.2 to 0.5" height). Engrave-11 >> uses fonts that the cutter cuts on the center line of the stroked fonts. >> Small endmills or v cuters or even diamond scribers work well >> >> I also like the vcarve v cutter method of doing fonts for signs, but I >> dont know of a free or open source program that does the v carving style >> of engraving. >> http://www.vectric.com/WebSite/Vectric/vcp/vcp_index.htm >> >> cheers >> >> >> > > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
